Table of Contents
Advertisement
8. Connection Diagram
RJ45 (UTP Cable)
9. Appearance
10. How to Use BNC to TB Connector and
10-1. How to measure long length UTP cable by BNC (BNC to RJ45 Connector)
• Use to measure cables installed over long distance of 10m ~ 600m.
• Use to measure UTP cable in BNC mode. Calibrate the cable to be measured, save the result
in Load Data and measure the cable with the saved data.
• When measuring cable length, use the set(calibrated) Load Data set by user.
• Length Measurement is only available in 1 Pair (No.1 and 2 in T568A, 568B Type).
BNC to RJ45 Connector
BNC to RJ45
Connector
- 14 -
BNC (Coaxial Cable)
Advertisement
Table of Contents
