Table of Contents
Advertisement
I
1-22
nstallatIon
4. Install End Splashguard
a. Insert back of bracket through slot in
leg. Use Screws to attach End Splashguard
Retainers to end frame.
Note: not all models have two brackets per
leg.
End
Splashguard
Brackets
Screw
SM 8-18x
/
1
2
Hex Head
b. Align forward edge of End
Splashguard with front splashguard, with
lower edge resting on floor. Fasten End
Splashguard to bracket with Screws.
c. Slip End Splashguard Cover under end
assembly. Fasten to end splashguard and
upper brackets with Screws.
End
Splashguard
Cover
Standard
End
Splashguard
Screw #8 x
Pan Head – Black
P/N 0515388_L
/
1
2
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
5. Seal End to End Frame
Remove front shelf and shelf support bracket.
Apply a
1
/
in. bead of silicone at the back
2
of the merchandiser, starting at the first slot.
Continue across the bottom and up the front
as shown below. Use field-supplied silicone in
any gap between front support bracket and
end assembly.
Seal
Glass
Front
Re-install bumpers as described beginning on
Page 1-12.
Note: Optional end bumpers
are factory-installed only.
Apply Silicone
Sealant
Screw
SM 8-18 x
/
1
2
Hex Head
Advertisement
Table of Contents
