Sony DVP-NS300 Operating Instructions Manual page 26

Audio Cord Connection Type You select Page
CD=
D-PCM
59
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby
Digital decoder)
59
/ij Press ENTER.
DTS is selected
lj?j Press +I+ to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 ((2)
through m)
Audio Cord Connection Type You select Page
am
OFF 59
ON (only if the amplifiel/leceiver
has a DTS decoder)
59
q
Press ENTER.
Quick Setup is finished All connections and setup operations are complete
You can directly start Quick Setup only when you run it for the first time
To lun Quick Setup a second time, select "QUICK" under SETUP in the Control Menu (page 54)
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 2 1 to 23
(a through e) Each of these are the default settings and do not need to be adjusted when
you first connect the player Refer to page 56 for using the Setup Display
26