Table of Contents
Advertisement
EVISTR VOICE RECORDER
http://evistr.com
support@evistr.com
To correct disk error.
Push down the power button from ON to OFF position. Connect the device to a Windows computer,
and format the disk from the computer to return to normal state.
Note: If you are using a MAC computer, please contact our customer support. Reformatting on a
MAC computer needs different options.
13) Factory Settings
Restores to factory default. Very helpful if confusion arises when creating settings.
Select Yes, press M to confirm. Device will start to restore factory settings. When completed, it will
show Restored!
14) A-B Repeat
When playing, press A-B button, start A-B repeating, screen will flash A, press A-B button again, it
will show A-B, now it will play from point A to point B, and repeat.
15) Lock Button, No Button Works
When it shows LOCK, no button works, press and hold A-B button to unlcok.
16) Connect External Microphone
When connecting to external microphone, the device support TRS 3.5mm external microphone, and
we need to to record setting -> record from, select at LINE IN option
17) Line-in Recording
When recording with LINE IN, the device support TRS 3.5mm audio cable, and we need to to record
setting -> record from, select at LINE IN option
18) Why LINE-IN Recording with Noise
It can be these reasons:
A. Input audio source higher than microphone range, lower down input audio source volume, and
pressing VOL- to decrease recording microphone sensitivity.
B. LINE IN jack didn't connect steady, try with new line in cable
CHAPTER THREE
1) Failed Connect to computer
Sometimes, you may met the failed connect to computer issue, it is normal like you failed connect
your flash drive to computer, so the solutions are same way for solve it. Here are some suggestion
for you fix this issue
A. Before connect voice recorder to computer, switch OFF the voice recorder
B. When connect the voice recorder to computer, do not press any buttons on the voice recorder, it
will exit connection mode
C. Do not swing the MicroUSB cable when connect to computer, in case of unstable connection
D. Sometimes failed connection due MicroUSB cable is broken or USB socket is loose, change a new
Page - 14 - of -18 -
Hide quick links:
Advertisement
Table of Contents
