Evistr L53 Manual page 12

http://evistr.com
So when playback the recording, we press FF/REW, instead of moving to next file, we can directly
jump the bookmark position.
B. Edit Recordings
For the file recorded at wav format, we can edit the recording by pressing T-mark button
1. Voice Cut:
When playback a recording file at point, and we stop, Voice Cut, we can cut the rest file, and drop it.
Voice Cut
REMAIN
Played part, it will keep
2. Voice Divide:
When playback a recording file at point, and we stop, Voice Divide, we can split the recordings into 2
files at that point
Voice Divide
PART ONE
Played part, PART ONE, it will be the same
file name as original
NOTE: if you use T-mark to divide the file named "20170930141945.wav"
3. Voice Insert:
When playback a recording file at point, and we stop, Voice Insert, we can insert new recording at
that point
Voice Insert
PART ONE
Played part
NOTICE: select voice insert, and then enter recording mode, after recording, press STOP, saved the recording, the
newly recorded part "NEW PART" will be inserted to the original recording
4. Voice Append:
When playback a recording file at point, and we stop, Voice Append, we can append new recording
at the end of that recording
EVISTR VOICE RECORDER
Paused Point
Paused Point
PART ONE will be named as "20170930141945.wav"
PART TWO will be named as "20170930141945_0.wav"
Paused Point
Page - 12 - of -18 -
support@evistr.com
DELETED
This Part will be deleted
PART TWO
Unplayed, PART TWO, it will renamed as
"Original File Name_0.wav"
NEW PART
Unplayed, PART TWO,it will behind the new
PART TWO
part