Technical Specifications; Power Off; Troubleshooting - Bresser 9630202 Operating Instructions Manual

2. Via USB connection with a computer
In ON mode connect the camera with a computer using a
USB cable. The device will be shown as a fl ash drive and
you can easily start viewing images on the computer's
screen.

3.6 Power off

Switch the On/Off lever to OFF position to power off the
camera. Please note that even in the OFF mode, the cam-
era still consumes certain power at μA level. Therefore,
please remove the battery if the camera will not be used
for a long time.

4. Troubleshooting

4.1 USB device is not recognized by the computer
This circumstance occasionally occurs in some OEM ver-
sions of Windows. It is not caused by a defect device. An
update of the USB drivers on the notebook or PC in most
cases solves the problem.
Technical specifi cations
Image sensor
Picture resolution
Infrared light range
IR LED:
Interfaces:
Memory card
Power supply
LCD screen
Mounting
Dimensions
Weight
2MP Color CMOS
2 MP / 3 MP* / 5 MP*
(*interpolated)
12 m
22 pcs. / 850 nm red Illumination
/ ca. 15m
Mini USB Port,
microSD memory card slot
microSD card up to 32 GB
8x AA (minimum 4x AA)
3,5cm (1,4˝) Color LCD
with belt
185 x 115 x 110 mm
330 g
EN
67