Table of Contents
Advertisement
Precautions in Handling the System Board
It is quite easy to inadvertently damage your system
board even before installing it in your system case.
Static electrical discharge can damage computer compo-
nents without causing any signs of physical damage.
You must take extra care in handling the system board
to ensure that no static build-up is present.
Tips in Handling the System Board
1) To prevent electrostatic build-up, leave the board in
its anti-static bag until you are ready to install it.
2) Wear an antistatic wriststrap.
3) Do all preparation work on a static-free surface with
components facing up.
4) Hold the system board by its edges only. Be careful
not to touch any of the components, contacts or
connections, especially gold contacts on the
board.
5) Avoid touching the pins or contacts on all modules
and connectors. Hold modules and connectors by
their ends.
Hardware Installation
Memory Installation
The G586VPM system board can support 2MB to
256MB of memory using SIM modules.
G586VPM
Installation Overview u 2-2
Advertisement
Table of Contents
