Replacement; Troubleshooting; Checkpoints - Samsung NV66M3571BS User & Installation Manual

Hide thumbs Also See for NV66M3571BS:
Table of Contents

Advertisement

Water collector
01
01 Water collector

Replacement

Bulbs
WARNING
• Before replacing a bulb, turn off the oven and unplug the power cord.
• Use only 25-40 W / 220-240 V, 300 °C heat-resistant bulbs. You can purchase
approved bulbs at a local Samsung service center.
• Always use a dry cloth when handling a halogen bulb. This is to prevent the
bulb from being tampered with fingerprints or sweat, resulting in a shortened
lifecycle.
NV66M3571BS_EU_DG68-00891A-01_EN.indd 37
The water collector collects not only excess
moisture from cooking but also food
residue. Regularly empty and clean the
water collector.
WARNING
If you encounter a water leak from the
water collector, contact us at a local
Samsung service center.
1. Remove the glass cap by turning anti-
clockwise.
2. Replace the oven light.
3. Clean the glass cap.
4. When done, follow step 1 above in the
reverse order to reinsert the glass cap.

Troubleshooting

Checkpoints

If you encounter a problem with the oven, first check the table below and try the
suggestions. If the problem continues, contact a local Samsung service centre.
Problem
Cause
• If there is foreign matter
The buttons cannot
caught between the
be pressed properly.
buttons.
• Touch model: if there is
moisture on the exterior.
• If the lock function is set.
• If there is no power
The time is not
supplied.
displayed.
• If there is no power
The oven does not
supplied.
work.
• If it is unplugged from
The oven stops while
in operation.
the power socket.
• If continuous cooking
The power turns off
takes a long time.
during operation.
• If the cooling fan does
not work.
• If the oven is installed
in a place without good
ventilation.
• When using several
power plugs in the same
socket.
• If there is no power
There is no power to
supplied.
the oven.
Action
• Remove the foreign
matter and try again.
• Remove the moisture and
try again.
• Check whether the lock
function is set.
• Check whether there is
power supplied.
• Check whether there is
power supplied.
• Reconnect the power.
• After cooking for a long
time, let the oven cool.
• Listen for the sound of
the cooling fan.
• Keep the gaps specified
in the product installation
guide.
• Use a single plug.
• Check whether there is
power supplied.
English 37
2016-12-13
11:43:05

Advertisement

Table of Contents
loading

Table of Contents