VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 7
Handheld vacuum cleaning (continued)
Using the extension tube for extended reach and handstick mode
For quick and easy vacuum cleaning on floors,
push the motorised floor brush
extension tube suction end
extension tube
(37)
cleaner suction inlet (20). To remove the
motorised floor brush, press the extension tube
attachments release buttons (38). To remove
the extension tube, press the handheld vacuum
cleaner attachments release buttons (19).
Using the attachments
27
3
(22)
into the
(39)
and attach the
to the handheld vacuum
25
26
To use the crevice tool
(27)
(26), or dusting brush
(25)
motorised floor brush (22), align the ridges on
the side of the tool with the grooves inside the
handheld vacuum cleaner suction inlet
push in place until a click is heard. To remove it
again, press the handheld vacuum cleaner
attachments release buttons (19).
NOTE: To use the dusting brush (25), it must be
attached to the upholstery nozzle
the attachments', below).
For extra reach whilst cleaning high areas like
coving etc, use the crevice tool (27), upholstery
nozzle
(26)
or dusting brush
motorised floor brush (22).
Crevice tool and brushes
Crevice tool (27)
for awkward places, corners
and behind radiators etc. This tool is also useful
on stairs.
Dusting brush (25)
for carpet, upholstery and
stairs etc.
Upholstery nozzle (26)
for upholstery and
bedding etc.
The dusting brush
(25)
must be attached to the
upholstery nozzle (26). Slide the dusting brush on
to the front of the upholstery nozzle until it clicks
into place, as shown.
upholstery nozzle
in place of the
(20)
and
(26)
(see 'Using
(25)
in place of the
7 7