Table of Contents
Advertisement
VC732000MUK Rev3.qxp_Instruction Book 23/02/2015 16:57 Page 8
Using the attachments on the handheld vacuum cleaner
Push the accessories
inlet on the end of the handheld vacuum
cleaner.
Alternatively, for extra reach, attach the
accessories together and push the assembly
into the suction inlet on the end of the
handheld vacuum cleaner.
Tool storage
When not in use, the attachments may be stored
on the charging cradle base (20). Assemble the
dusting brush
(3)
and push them onto the crevice tool (1). Then
push this assembly onto the accessory holder
(16)
on the charging cradle (15).
Emptying the dust canister
Empty the dust canister
does not look full, this will maintain the
performance.
Remove the handheld vacuum cleaner
1.
the main vacuum cleaner body
vacuum cleaning', page 7).
8
(1)
or
(2)
into the suction
onto the upholstery nozzle
(13)
regularly even if it
(12)
from
(7)
(see 'Handheld
List of attachments
Crevice tool (1)
for awkward places, corners
and behind radiators etc. This tool is also
useful on stairs.
Upholstery nozzle (2)
and stairs etc.
Dusting brush (3)
stairs etc. The dusting brush
the upholstery nozzle
the side as shown above.
Press the dust canister release button
2.
pull the dust canister away from the handheld
vacuum cleaner.
(2)
Remove the dust canister filter
3.
the dirt from inside the dust canister.
for carpet, upholstery
for carpet, upholstery and
(3)
attaches to
(2)
by sliding on from
(11)
and
(14)
and empty
Hide quick links:
Advertisement
Table of Contents
