Summary of Contents for Morphy Richards Supervac deluxe
Page 1
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 1 VC734050MUK Rev3 * Register at www.morphyrichards.co.uk/support UK and Ireland customers only Cordless Vacuum Cleaner Please read and keep these instructions for future use IMPORTANT: Maintain your product to ensure optimum performace and product life.
• Never modify the cleaner in any way. • Never touch the adaptor, product or cable with wet • Use only Morphy Richards spare parts and accessories. hands. Electrical requirements • Unprofessional repairs can be dangerous for users. •...
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 4 Multiple functionality Floor Floor Handheld Extended vacuum vacuum vacuum reach cleaning cleaning in cleaning cleaning in in upright handstick handstick mode mode mode Your vacuum cleaner can easily be configured into several different cleaning modes: •...
Page 5
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 5 Assembly in upright mode Push the neck of the motorised floor brush (22) into the handheld vacuum cleaner suction inlet (20) until it clicks into place. To remove the upright handle connector hole plug (13a) from the upright handle connector hole (13b), press the upright handle release buttons...
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 6 Using in upright mode Assemble the product for upright vacuum If cleaning floors under tables, chairs or low lying cleaning (see ‘Assembly in upright mode’, page furniture , press the back saver handle button pivot the upright handle forwards, allowing the main body to drop parallel with the floor without IMPORTANT: When using the motorised floor...
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 7 Handheld vacuum cleaning (continued) To use the crevice tool (27) upholstery nozzle (26), or dusting brush (25) in place of the motorised floor brush (22), align the ridges on the side of the tool with the grooves inside the handheld vacuum cleaner suction inlet (20) push in place until a click is heard.
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 8 Maintenance - emptying Tool storage the dust canister and When not in use, the attachments may be stored cleaning the filters in the tool storage (30) on the charging cradle (29) as shown (right). Empty the dust canister (12) regularly even if it...
Page 9
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 9 Empty the dirt from inside the dust canister and Twist part C anti-clockwise, this will unlock the push the swing base closed again. whole assembly ready for cleaning. Remove the foam filter (11a) from the main filter (11).
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 10 To refit the dust canister filter (11b) back into the Turn the motorised floor brush (22) over to dust canister, a lign the arrow graphic on part A inspect the rotating brush bar (22c). with the unlocked padlock arrow graphic on the dust canister, then twist so the arrow graphic on part A...
Page 11
VC734050MUK Rev 3.qxp_Instruction Book 06/03/2018 16:04 Page 11 • “Does not pick-up from floor, no suction but the Disposal motorised floor brush is rotating” Switch off the product, remove the motorised When the product reaches the end of floor brush (22) and the extension tube (37)
Page 12
12 months when you register the product within the appliance must have been used according to the 28 days of purchase with Morphy Richards. If you do not instructions supplied. register the product with Morphy Richards within 28 days, This appliance is intended for domestic use only.
Need help?
Do you have a question about the Supervac deluxe and is the answer not in the manual?
Questions and answers