Troubleshooting - Stanley FATMAX FMCR001 Manual

To program the channels:
Turn power ON.
u
Press the mode button (2) until the desired mode is
u
selected (AM or FM).
Tune the radio to the desired station (read tune or
u
Seek function).
Press the set preset button (3). The "Mem" icon will flash
u
in the LCD (5).
Press the "1-6" preset toggle button (3) to scroll through
u
the 6 presets.
Once it displays the desired preset number, press the set
u
preset button.
Repeat steps 3 through 6 to set the other memory buttons.
u
Equalizer button
To set the bass and treble:
Press the equalizer button (6) once. The bass equalizer
u
will appear on the LCD (5).
Rotate the ON/OFF - volume dial (1) to set the desired
u
bass level.
Press the equalizer button a second time to get to the
u
treble equalizer.
Rotate the ON/OFF - Volume dial (1) to set the desired
u
treble level.
Press the equalizer button a third time to exit.
u
Note: If you do not press a button within 5 seconds, the
equalizer programming feature will automatically be set to
the new setting.
Important radio notes
Reception will vary depending on location and strength
u
of radio signal.
Certain generators may cause background noise.
u
AM reception will most likely be clearer when powered
u
by a battery pack.
Auxiliary port
To use the auxiliary port (15), plug the output jack from
a phone, CD or MP3 player into the auxillary port (cord
sold seperately).
The sound from the external source plays through the
speakers. The radio will not automatically switch to AUX Mode
when an input source is detected. The mode (2) button needs
to be set to the "AU" function.
(Original instructions)

Troubleshooting

Problem Possible cause
Unit will not turn Battery pack not
ON. installed properly
Battery pack not
charged.
Internal componets
too hot.
Cord not plugged in.
Cord or switch is
damaged.
Battery pack will not Battery pack not
charge. inserted into
charger.
Charger not plugged
in.
Surrounding air
temperature
too hot or too cold.
Unit shuts off Battery pack has
abruptly. reached its
maximum thermal
limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shut off
abruptly when the
charge is depleted.)
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/appliance care and regular
cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
Dirt and grease may be removed from the exterior of the
u
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals for
cleaning the non-metallic parts of the appliance. These
ENGLISH
Possible solution
Check battery pack
installation.
Check battery pack
charging
requirements.
Allow tool to cool
down.
Plug tool into a
working outlet
Have cord or switch
replaced
at an authorized
Stanley Fat Max
service center.
Insert battery pack
into charger until
LED illuminates.
Plug charger into a
working outlet.
Refer to "Important
charging notes" for
more details.
Move charger and
battery pack to a
surrounding air
temperature of
above 4,5°C or
below 40,5°C.
Allow battery pack
to cool down.
Place on charger
and allow to charge.
9