Lucci LEDlux EMMERSON Installation Instructions

Installation Instructions
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.

Warranty

•
This portable luminaire is covered by a 3 year warranty valid for in-store replacement or refund only.
•
The warranty is from date of purchase. Please retain proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification to the portable luminaire.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.

Installation Requirements

•
Select a suitable location for this portable luminaire:
Ensure it is on a flat and stable surface.
-
This portable luminaire is suitable for indoor use only.
-
Do not place flammable material near or over the portable luminaire.
-
Ensure the portable luminaire is not installed in direct line of an air vent/system.
-
If the portable luminaire is placed in an area prone to moisture, ensure that the area is well ventilated and an
-
appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product
fault, and as such is not covered under warranty.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable luminaire is
fully assembled and is ready to use for the first time.

Installation Directions

1. Remove all packaging material from the product.
2. Insert the plug (B) into the mains power socket outlet and ensure it is fully plugged in.
3. Turn power on at the mains power socket outlet.
4. Use the cord line dimmer switch (A) to turn the portable luminaire on/off and for dimming function.
1 | P a g e
EMMERSON LED FLOOR LAMP
SKU# 269355, 269357
Rated Voltage 220-240V~ 50Hz
v 1 . 1 ( 0 1 / 2 0 2 0 )