WimTec SanTec PROOF P4 Assembly And Operating Instructions Manual page 22

EN
Assembly: mains operation version
12
15
12. Check whether the stop valves are open (knobs are aligned
alongside the water pipes).
13. Hook the shower panel into the rear bracket strap.
ATTENTION! Be careful not to bend or crimp any cables or
tubes.
14. Secure the shower panel from below at the hanger screw
using a washer and wing nut.
15. Open the main water valve.
16.
Perform a system test.
22 Shower paneel
PROOF P4
13
16
SanTec PROOF P4
Art.Nr. 121 018
14
ATTENTION!
Perform the following steps
in the order indicated!
!