WimTec SanTec PROOF P4 Assembly And Operating Instructions Manual page 20

EN
Assembly: 6 V battery version
11
14
11. Check whether the stop valves are open (knobs are aligned
alongside the water pipes).
12. Hook the shower panel into the rear bracket strap.
ATTENTION! Be careful not to bend or crimp any cables or
tubes.
13.
Secure the battery module at the hanger screw using a
washer and wing nut.
14. Open the main water valve.
15. Perform a system test.
20 Shower paneel
PROOF P4
12
15
SanTec PROOF P4
Art.No. 120 998
13
ATTENTION!
Perform the following steps
in the order indicated!
!