Accessories; Angle Drive; Increased Clamping Range; Taking Out Of Service - WNT HDG2 Installation And Operating Instruction

________________________________________________________________________________________
9

Accessories

9.1 Angle drive

9.2 Increased clamping range

10 Taking out of service

The clamping device and all accessories can be disposed of as scrap metal without any risk.
www.wnt.com
 Push in and fix the angle drive as shown in the diagram.
 The drive can now be operated with the standard crank.
 Lubricate turning parts at regular intervals, e.g. using
MOTOREX Supergliss 68 K lubricant to ISO VG 68.
 Fit jaws as shown in the illustration.
 Adjust both set screws so that there is no play. (do
not clamp)
XND.00004.023_A - 02/2018 24