Operator Qualifications; Personal Protective Equipment; Warranty; Description Of The Clamping Device - WNT HDG2 Installation And Operating Instruction

________________________________________________________________________________________

2.6 Operator qualifications

The installation, initial setup, fault analysis and periodic monitoring have to be carried out by
competent personnel with the relevant qualifications.

2.7 Personal protective equipment

2.8 Warranty

The warranty period is 24 months from the date of delivery ex-works, provided the machine is
used as intended and subject to the following conditions:
 Compliance with the concurrent documents.
 Observance of environmental and work conditions.
 Observance of the specified servicing and lubrication intervals.
 Observance of the maximum service life.
Parts in contact with the workpiece and wear parts are not covered by the warranty.
Warranty – Maximum service life
Period of warranty
Maximum service life [clamping cycles]
3

Description of the clamping device

The HDG2 has been designed for clamping raw parts and finished workpieces.
A wide range of accessories ensures the versatility of the equipment.
The force is generated purely mechanically with the help of a mechanical force element. A
setting ring is used for adjusting the force. The set clamping force is achieved by turning the
hand crank.
Mounting and removing the HDG2 is quick and easy.
www.wnt.com
WARNING
Risk of eye injury through ejected, hot fragments!
Ejected hot fragments can lead to serious eye injury.
The regulations for safety at work and the prevention of
accidents always have to be observed when working with the
machine.
Personal protection equipment must be worn at all times,
in particular safety boots, gloves and safety goggles.
24 months
50,000
XND.00004.023_A - 02/2018 18