IBM DPI C13 PDU+ Installation And Maintenance Manual page 26

3. Align the PDU with the opening in the side of the rack cabinet; then, while
4. If the PDU comes with a detached power cord, connect the power cord now.
14
DPI C13 PDU+, DPI C19 PDU+, and DPI C19 3-phase PDU+: Installation and Maintenance Guide
holding the PDU in place, attach the brackets to the rack-mounting flanges with
four clip nuts and four M6 screws that come with the PDU.
L A
N
1
2
3
4
5
6
Attention: You must disconnect the main input power before connecting or
disconnecting the input power cord from the PDU.
Align the connector on the power cord that comes with the PDU with the
connector on the front of the PDU, turning as necessary for key alignment; then,
turn the twist-lock on the connector clockwise until it locks into place.
Key alignment
Twist lock