Honeywell PC42t User Manual page 47

7 Disconnect the cable from the printhead and remove the printhead
Warning: Do not touch the printhead surface area.
8 Insert the grounding screw into the grounding cable lug and then
9 Connect the ribbon cable to the new printhead.
10 Slide the printhead into the holders in the print mechanism.
11 Tilt the printhead up into the printer lid and press it into place.
12 When the printhead is in the correct position, the printhead latches
13 Close the print and ribbon mechanism and the cover.
PC42t Desktop Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Chapter 3 — Troubleshoot and Maintain the Printer
from the printer.
fasten the screw to the new printhead.
snap into place on the sides of the printhead.
For a thermal transfer printer, install the ribbon.
V10 CONSUMIBLES S.L.
37