Honeywell PC42t User Manual page 17

3 Insert the media spindle into the media roll. If there is an empty
4 Adjust the black mark sensor according to this table:
PC42t Desktop Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
media core in the media compartment, remove it.
• If you have a 1.0-inch core, insert the media spindle so that the
1"^ is facing upward.
• If you have a 1.5-inch core, insert the media spindle so that the
1.5"^ is facing upward.
Type of Media
Black mark
Gap
Cloth tag and other media
Move the sensor to the left triangle for gap media.
V10 CONSUMIBLES S.L.
Chapter 1 — About the Printer
Position of Sensor
Under the black mark
Line up with the left triangle
Line up with the right triangle
(default position)
7