Menu Settings; Changing Settings - Siemens TI955 connect Series Instruction Manual

Q

Menu settings

T his menu is used for changing settings
M e n u s e t t i n g s
individually, accessing information and
starting a programme.

Changing settings

1. Press $/± button, turn the rotary
selector to the left and select
"Settings". Press the rotary selector.
The different setting options will
appear in the display.
2. Select the desired setting using the
rotary selector.
The current setting is highlighted in
colour on the display.
Press the navigation button under
3.
"select".
The following settings are available:
Settings
Language
Water hardness
Home Connect*
Switch off after
Brightness display
Possible settings
Different languages
1 (soft)
■
2 (medium)
■
3 (hard)
■
4 (very hard)
■
Water-softening system
■
Settings for connection to WLAN network (home network) and mobile devices
(see section "Home Connect").
5 minutes
up to to
3 hours
Level 1 up to level 10
Standard setting 7
4. Use the rotary selector to change the
setting.
Press the navigation button under
5.
"confirm".
The setting has been saved.
6. Press $/± button to exit "Menu".
The drink selection appears on the
display.
Notes
You can switch to the previous level
■
by pressing the navigation button
under "back".
The setting procedure can be
■
aborted by pressing the navigation
button under "abort".
Press $/± button to exit the menu at
■
any time.
If no entry is made within approx.
■
2 minutes, the menu closes
automatically and the settings are
not saved.
Explanation
Setting the language to be used for display texts.
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can be requested for exam-
ple from your local water supplier.
It is important to set the water hardness cor-
rectly so that the appliance indicates in good
time when the descaling programme must be
run.
If a water softening system is installed in the
house, please select "Softening device".
Setting that determines how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Setting that governs the brightness of the dis-
play
Menu settings en
63