Download Print this page

ESCALADE Goalrilla B2800W-2EF Owner's Manual

Yard guard

Advertisement

Quick Links

Yard Guard
O W N E R
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons
before assembling or ordering parts.
3. T o make assembly of your Yard Guard easier , check all cartons for kits.
All hardware may not be located in one kit.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes
may not align and parts may not easily fit together . Leave locknuts slightly loose until you are instructed to
tighten them. You will need a 5/8" wrench, two 1/2" wrenches and a
5. Save these instructions and your proof of purchase (receipt) in the event that the manufacturer
has to be contacted for replacement parts.
Please Do Not Return This Product To The Store!
Contact Hammer Sports AG at:
Tel: 0731-97488-41
Email:
info@hammer-basketball.com
Hammer Sport AG
Abt. Kundendienst
Von-Liebig-Str. 21
89231 Neu-Ulm
Please visit our website at:
www.hammer-basketball.de
Escalade® Sports products may be manufactured and/or licensed under multiple patents.
Additional patents may be pending. One or more patents and/or pending patents may cover specific product.
See
Goalrilla.com/legal
for more information.
' S
M A N U A L
FAILURE TO FOLLOW THESE WARNINGS MAY
R E S U LT I N S E R I O U S I N J U R Y A N D O R
PROPERTY DAMAGE.
Owner must ensure that all players know and
follow these rules for safe operation of the system.
!
Do not climb on the basketball stand;
!
Do not hang on the rim/basket;
!
Not intended for basketball games with
competitive character, only suitable for
practice of throwing techniques
!
Install only on flat solid ground;
!
Do not use in extreme wind or bad weather, the
basketball stand could tip over!
MODEL NO.
B2800W-2EF
HAMMER ITEM NO.
2154
WARNING
©
/
2L-7928-00
®
2020 Escalade Sports

Advertisement

loading
Need help?

Need help?

Do you have a question about the Goalrilla B2800W-2EF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ESCALADE Goalrilla B2800W-2EF

  • Page 1 Do not use in extreme wind or bad weather, the basketball stand could tip over! 2L-7928-00 Escalade® Sports products may be manufactured and/or licensed under multiple patents. Additional patents may be pending. One or more patents and/or pending patents may cover specific product. ®...
  • Page 2 NOTE: NOTE: ALWAYS ALWAYS place the Yard Guard into the Storage position when not in use, place the Yard Guard into the Storage position when not in use, especially during bad weather. Net sleeves can fill and hold water causing especially during bad weather.
  • Page 3 YARD GUARD BRACKET NOTE: Two brackets (#1 & #2) are required. Bracket #1with three holes goes on top of bracket #2. A. Before assembly peel and stick washers to Brackets Protective Surface on this Protective side will face the back of #1 &...
  • Page 4 Two 7/16” Wrenches and one 9/16” Wrench will be required for the following steps. 1. Taking the longer U-bolt #3 slide it over the pole as shown Protective Surface on below, Detail 1 Detail 1 . Please be careful not to scratch the paint brackets goes facing from your system, packaging foam can help with this.
  • Page 5 5. Slide Right Yard Guard net (#13) onto Steel Tube assembly as shown in Detail 3. Repeat for Left Yard Guard Net #14 with Brand and Warning Label. No screws are required for assembly. BEFORE GOING TO THE NEXT PAGE DETERMINE WHICH BASKETBALL SYSTEM YOU HAVE. IF YOU HAVE A “...
  • Page 6 6. Using a ladder take the upper pole bracket #16 with Protective Protective Surface surface facing the pole, slide the shorter U-bolt #15 through bracket to attach the Nets as shown in Detail 4 Detail 4 . Attach nuts so that the bracket may still move up and down.
  • Page 7 PARTS TO ATTACH TO FT SERIES MODELS “ ” Tower Bracket 2S-9419-00 4A-8245-00 QTY.2 QTY.1 HARDWARE TO ATTACH TO FT SERIES MODELS “ ” 3/8-16 X 1” NYLON BOLT 1B-7169-00 QTY.6 5/16-18 LOCKNUT 5/16-18 X 1 1/4" BOLT ZINC 2B-6009-02 1B-7168-00 QTY.
  • Page 8: Installation Location

    INSTALLATION FOR MODELS B3015, B3016 & B3017 FT SERIES OVERVIEW Brackets to hold the yard Guard net will be installed on the to the upper poles as shown INSTALLATION LOCATION STEP 1 Centering Set the Brackets (#21) on top of the Indentations upper posts making sure the two Centering Indentations on each bracket...
  • Page 9 TOWER The sheet metal Tower (#22) can flex to get wider or narrower, on units with a 72” or 60” backboard the Tower will need to be flexed out to fit the brackets. On units with a 54” backboard the Tower may need to be flexed in. NOTE: Tower will deform permanently.
  • Page 10 HARDWARE NEEDED ACTUAL SIZE NOTE If you have a (72”backboard) continue with “ Step for ”, on any other unit skip to step “ 54 & ”. 5/16-18 X 1 1/4" BOLT ZINC 5/16-18 LOCKNUT 1B-7168-00 2B-6009-02 QTY. 4 QTY. 2 STEP for FT72 Insert a bolt (#24)
  • Page 11 FRONT FRONT OF POLE OF POLE BACK OF POLE FRONT OF POLE Detail 8 FRONT OF POLE FRONT OF POLE Detail 9 Detail 7 FRONT VIEW 9. There are 5 straps #19 used to secure the Yard Guard to your pole as shown in Detail 7 Detail 7 .
  • Page 12 Storage instructions 1. First, make sure all male clips have been disconnected from their Figure 4 corresponding clips. Carefully lift the bottom tube of the Yard Guard upwards and toward the net. Gather the excess netting to the pole with one hand while using the other to grab the top storage Strap with the Plastic Clip .
  • Page 13 * R i m n o t s h o w n f o r c l a r i t y . WA RN 4L-8156- o l e o f P B a c k...
  • Page 14 Key# Part # Description Qty. 4A-8119-00 Lower 3 hole bracket 4A-8120-00 Lower 1 hole bracket See U bolt section below 2B-6787-00 3/8” Washer no tape 2B-6785-00 3/8” Nuts for U bolts 8S-7934-00 Inner Tube (with hole) 2B-6786-00 3/8” Washer w/ double sided tape 8S-7700-00 Fiber Glass rod Pivot Tube 1B-7048-00...
  • Page 16: Limited 1 Year Warranty

    Goalrilla System will be the purchaser's responsibility. Shipping ® charges for replaced or warranted merchandise sent back to the customer from Escalade Sports factory must be prepaid by the customer ®...