Kimball Footprint Lateral File with Hinged Door Storage Assembly Instructions

Footprint ®
Lateral File with Hinged Door Storage

Tools Required

Level
I
3
I ⁄ " nutdriver or socket with ratchet
8
Phillips screwdriver
I

Description

These instructions provide the basic information for leveling
the lateral file and adjusting the hinged door (Figure A).

Installation

1. Position lateral file in the desired location.
2. Close hinged doors and all drawers.
3. Remove bottom drawer: Extend the drawer fully; remove
shipping screw from each slide on drawer; disengage
drawer slides by lifting up on the tabs near front of each
slide; and pull drawer forward and upward to remove
(Figure A).
4. Level the unit by using the
the floor glides in the bottom panel. When unit is level
make sure all glides are snug to the floor (Figure B).
5. Pull bottom drawer slides out and install drawer in reverse
order outlined in step 3. Ensure drawer slides catch under
rear rail hooks (Figure A).
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2066787 Revision B-08
3
⁄ " nutdriver or socket to adjust
8
Figure A
Remove
Shipping
Screw
Lift Up
and Out
Figure B
Assembly Instructions
Page 1 of 2
Lift Tab
Rear Rail
Hook