Installing The Safety Chain - Toro CM Series Operator's Manual

3

Installing the Safety Chain

Parts needed for this procedure:
1 Safety chain
2 Connecting link
Installing the Safety Chain
Side-Dump Models Only
Form a hook on the end of a bendable piece of rod or stiff
wire, (not included), and install the safety chain as shown in
Figure 8.
Note: Ensure that approximately equal lengths of safety
chain extend from either side of the front post.
Figure 8
Installing the Safety Chain
End-Dump Models Only
Note: Ensure that approximately equal lengths of safety
chain extend from either side of the tongue.
12
Figure 9