Bluetooth Connection - FeiYu Tech VIMBLE ONE Quick Start Manual

■ Smartphone Installation
It is recommended to remove the smartphone case
before installation. Keep the logo of the smartphone
holder upward. Keep the smartphone holder in center.If
the smartphone tilts after installed the smartphone,
please slide the smartphone to left or right to balance.
LOGO keep upward
■ Extend and Reset the Handle
(1) Hold the handle with one hand, hold upper grip
with other hand.
(2) Extending: Pull the extendable bar out to suitable
length (Extendable range 0~183mm).
Reset: Push upper grip to make the extendable bar
down to handle part.
Extended
Reset

■ Bluetooth Connection

Turn on the gimbal.
Method one: Download and install Feiyu ON App, run
the App, follow the prompts to turn on and connect
with the bluetooth.
Method two: Turn on the smartphone bluetooth,
Connect the gimbal bluetooth in the setting of phone,
e.g. FY_VB01_xx.
(If the bluetooth can't be found, please
turn off Feiyu ON App in the background.)