Standalone Operation; Static Colors; Preset Chases; Speed - Venue Tetra 6 Manual

Control Panel Menu Selections (Continued)
Audio/Sound-Active
Programs
Flash/Strobe
DMX Address
Level/Brightness

Speed

Threshold/Audio
Sensitivity

STANDALONE OPERATION

STATIC COLORS

This fixture has 14 distinct, pre-programmed static colors. Refer to the "Control Panel Menu Selections"
chart on page 9 for a list of colors. These are accessed via the Control Display (page 8).
1. Press <MENU> until "C-" are the first two characters on the display screen.
2. Using <UP> and <DOWN>, select the desired color (1-14).
3. Press <ENTER> to confirm settings.

PRESET CHASES

This fixture has 20 pre-programmed chases (10 switching and 10 fading). These are accessed via the
Control Display (page 8).
4. Press <MENU> until "P-" are the first two characters on the display screen.
5. Using <UP> and <DOWN>, select the desired program (C0-C9 for switching chases,
or F0-F9 for fading chases).
6. Press <ENTER> to confirm settings.
SPEED
The speed of internal chases and strobe functions can be adjusted from 1 (slowest) to 10 (quickest). This
setting is accessed via the Control Display (page 8).
1. Press <MENU> until "S-" are the first two characters on the display screen.
2. Using <UP> and <DOWN>, select the desired speed between 1 (slowest) and 10 (quickest).
3. Press <ENTER> to confirm settings.
www.venuelightingeffects.com
MAIN FUNCTION SUB-FUNCTION
A
F
d
L
S
t
F6
F7
Select sound-active fading chases 0-9.
F8
F9
Enable strobe, and select strobe color.
Reference static colors above for corresponding
1-14
numbers. Strobe speed can be adjusted using the
1-512
Select brightness level between 1 (lowest level)
1-99
Select speed of internal programs. This applies to
1-10
Select sensitivity level of the internal microphone
1-10
between 1 (most sensitive) and 10 (least sensitive).
INSTRUCTION
speed ("S") parameter.
Select starting DMX address.
and 99 (highest level).
Pattern and Strobe functions.
11