Advertisement
MODEL 675B
REF
PART NO.
NO.
1
GW-1714
1a
GW-9400
1b
GW-9401
2
GW-20718
3
GW-9301
4
1916597
5
GW-1224-1
5
GW-1224-2
5
GW-1224-3
5
GW-1224-4
NOTE: Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-15 thousandths of an inch (.005-.015) end play on drive shaft.
A/R – As Required
* Specify GRADE 5 if ordering part locally.
DESCRIPTION
Bearing, Tapered Roller with Race
Drive Shaft Bearing Cup
Drive Shaft Bearing Cone
Spur Gear
Key, 3⁄16 sq. x 1
Rolled Drive Shaft (Drive shaft is one-piece
with integral, single-lead, work-hardened
front worm, and integral, six-lead work-
hardened rear worm. Also includes
pressed-on GW-1714 and GW-9301)
Shim, Rear Bearing Cap,.010" thick, see
Note below (A/R)
Shim, same as above, but.030" thick, see
Note (A/R)
Shim, same as above, but.005" thick, see
Note (A/R)
Shim, same as above, but.062" thick, see
Note (A/R)
B
REF
PART NO.
NO.
...
GW-1325C
6
GW-9572
7
GW-9944
8
1108841
9
1916522
10
GW-1440
11
721-04044
12
1113527
13
GW-9953
14
GW-9428
15
GW-9677
16
GW-20791
17
GW-20792
18
GW-9093
19
GW-20799
20
GW-9517
29
A
DESCRIPTION
Shim Set (Incl. two GW-1224-1; two 1224-
2 and one GW-1224-3 (A/R)
Hex Hd. Screw, 5⁄16-24 x 1-1⁄8*1
Washer, Disc Spring (concave surface faces
pulley)
Key, 3⁄16 sq. x 1-1⁄2
Transmission Drive Pulley
Support Washer
Oil Seal, Input Pinion Shaft
Retaining Ring (external)
Thrust Washer
Bushing
Set Screw, 5⁄16-18 x 3⁄8*
Input Pinion (steel shaft)
Input Pinion Gear
Retaining Ring (external)
Pinion Assy. (Incl. Refs. 16, 17 & 18)
Retaining Ring
Advertisement
