Table of Contents
Advertisement
NOTES:
• Align the drive pin notches in the TEC drive plate with the drive
pins on the hub when you install the drive plate into the
basket. Be sure that the drive pins are seated in the notches
and not in the bigger sections.
• ALL the TEC plates must be aligned in the drive pins notches
or damage may occur. The plates will not move when installed
correctly.
Doc ID: 191-7113080A
Doc Rev: 080118
Pg. 11
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreManual TorqDrive and is the answer not in the manual?