Window Installation - Whirlpool CA15WYR0 Use And Care Manual

1. Using the tray back as a template, center in windowsill
against outside edge of stool.
C
A. Tray back
B. Windowsill
C. Outside edge of stool
2. Using the 2 inside screw holes in tray back, mark
screw locations on windowsill for mounting the
®
SMART-MOUNT tray.
3. Remove tray back. Using these marks, drill
the windowsill approximately 1 " (3.8 cm) deep.
Assemble SMART-MOUNT
6

Window Installation

B
A
" pilot holes in
® Tray
1. To assemble the tray frame, insert tab on tray back into slot
on tray side. Check to see that the tab is engaged and the
2 pieces are aligned. Insert 2 - #8 - 18 x
to secure.
2. Repeat with other tray side.
B
A
A. Tray back
B. #8 - 18 x
C. Tray side
Attach Support Legs
1. Determine the correct slots on the tray side from the type of
exterior construction of the building.
Thin Wall Construction (vinyl, wood, etc.)
A. First and second slots
Thick Wall Construction (brick)
A
A. Second and third slots
" hex-head screws
C
" hex-head screws
A