La Crosse Technology VA1 Setup Manual page 12

WEATHER
Viewing Your Data
Forecasted HIs & Los and Indoor Comfort Level
When connected to Wi-Fi, the Alarm Clock will show forecasted daily
HI and LO temperatures, powered by AccuWeather. Without Wi-Fi,
or if you chose to opt-out of internet weather and time services, this
section will show your current indoor comfort level.
Indoor Comfort Level Readings
1%RH to 25%RH
71%RH to 83%RH
WEATHER
Mounting Your Thermo-Hygro Sensor
• Use the hanging hole on the back to mount the
sensor. Or, insert one mounting screw through
the front of your sensor.
• Mount your sensor on a north-facing wall or in
any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from
the sun.
26%RH to 39%RH
84%RH to 99%RH
• The maximum wireless transmission range to
the Alarm Clock is up to 400 feet (122 meters)
in open air, not including walls or floors.
• Be sure your sensor is mounted vertically,
to allow moisture to drain out properly.
• For more senor mounting information, visit:
bit.ly/th_sensor_mounting
Example Forecasted HIs & LOs
Your display must be connected to
Wi-Fi to receive AccuWeather data
40%RH to 70%RH
Comfort Level Readings will show when
not connected to WiFi or if you opt-out
of internet weather and time services.
11