Motor Mount Pivot Installation - Peco Z Trimmer ZT-3000 Operator's Manual

Motor Mount Pivot Installation

Position (2) of the mounting holes of the Motor Mount Pivot (Item #1) between the Swing Arm (Item #2). Refer to
Figure A. For desired cut height adjustments, see page 11.
Note: Some parts and features have been hidden
from each respective view for visual clarity.
Once positioned, secure the Motor Mount Pivot by
positioning the Pivot Lock Bushing (Item #3) between the
top mount hole you are using of the Motor Mount, refer to
Figure B. Then use (1) 5/16"-18 x 4-1/2" Carriage Bolt
(Item #4), (2) 1/4" Flat Washers (Item #6) and (1) Star Knob
(Item #8) to secure the Motor Mount Pivot. Leave the fastener
loose enough so that the Motor Mount Pivot will be able to pivot back and forth freely.
Then use (1) 5/16"-18 x 4-1/4" HHCS (Item #5), (2) 1/4" Flat Washers (Item #6) and (1) 5/16"-18 Ny-Flange Lock Nut
(Item #7) on the bottom mount hole of the Motor Mount Pivot.
Refer to Figure C.
Figure B
Figure A
Figure C
9