Height Adjustment Of Cutting Knife - DURKOPP ADLER 887 Service Instructions Manual

7.3

Height adjustment of cutting knife

The cutting knife (1) is clamped in the knife holder (2) with two bolts (3)
and by means of a groove.
6
5
3
–
Lower the knife holder (2) to the bottom position by means of a
lever (4).
–
Set the knife (1) bottom position with a flat screwdriver (5) inserted
in the lifting eccentric groove through the side cover hole (6).
–
Lower the loosened cutting knife (1) entirely so that its lower part
touches the retaining part (7). Then lift it by about 0,5-1mm
upwards and tighten the bolts (3).
–
Check its correct movement by rotating the screwdriver manually
when the knife is lowered.
38
4
2
1