Siemens CT636LES6W Instruction Manual page 46

en Home Connect
■ Touch [ Disconnect from network ].
The connection to the network and app is
disconnected. Wi-Fi and remote start are
switched off.
F
Information about the WLAN network
is cleared.
Connecting with app
The Home Connect App can be installed on
any number of mobile devices, which can
then be used to connect to the fully auto-
matic coffee machine.
The fully automatic coffee machine must
already be connected to the WLAN network.
■ Open the app on the mobile device.
■ Press button r to open the menu.
■ Touch arrow key L repeatedly until the
display shows "Home Connect".
■ Touch [ Home Connect Settings ].
■ Touch [ Next ].
■ Touch [ Connect with app ] to connect to
the appliance with the app.
Remote start
If you wish e.g. to start drinks dispensing
on the fully automatic coffee machine via
a mobile device, Remote start must be
activated.
B
Risk of burns!
If an unattended remote start takes
place, third parties might be scalded
if they reach under the coffee dis-
penser during drinks dispensing. You
should therefore make sure that with
an unattended remote start that there
is no risk to other people, in particu-
lar not to children, or to property.
F
The [ Remote start ] text field is is
only visible if connection with Home
Connect has been successfully
completed.
If Remote start is switched off, only
the modes of the fully automatic
coffee machine are displayed in the
Home Connect App.
■ Press button r to open the menu.
46
■ Touch arrow key L repeatedly until the
display shows "Home Connect".
■ Touch [ Home Connect Settings ].
■ Touch [ Next ].
■ Touch [ Remote start ] to switch the
function Remote start "On" and "Off".
Device Info
Display for network and device information
■ Press button r to open the menu.
■ Touch arrow key L repeatedly until the
display shows "Home Connect".
■ Touch [ Home Connect Settings ].
■ Touch [ Next ].
■ Touch [ appliance Info ]. The SSID, IP,
MAC address and serial number of
the appliance are displayed for a few
seconds.
Information on data protection
When the fully automatic coffee machine
is connected for the first time to a WLAN
network which is connected to the Internet,
the appliance transmits the following cate-
gories of data to the Home Connect server
(initial registration):
■ Unique appliance identification ( consisting
of appliance codes as well as the MAC
address of the installed Wi-Fi communi-
cation module).
■ Security certificate of the Wi-Fi commu-
nication module (to ensure a secure IT
connection).
■ The current software and hardware
version of the fully automatic coffee
machine.
■ Status of any previous resetting to the
factory settings.
This initial registration prepares the Home
Connect functions for use and is only
required when you want to use these Home
Connect functions for the first time.
F
Please note that the Home Connect
functions can only be used in con-
junction with the Home Connect App.
Information on data protection can
be accessed in the Home Connect
App.