SECURE TO COUNTERTOP WITH BRACKETS BASED ON THE COUNTERTOP THICKNESS Place the cooktop into the cutout and tighten it with the supplied clamps. These will cope with the countertop thicknesses 3/4”- 2” (19 - 50 mm)when used in the two REPEAT ON ALL THE OTHER SIDES orientations shown.
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Have you installed the clamping brackets? Have you verified that the type of model (factory-set for NG or LP) matches the type of gas at the site of installation? Have you sealed all connections with gas tape? Have you leak-tested all connections? Is the cooktop set to the correct working pressure? Have you affixed the supplied duplicate data plate label on an adjacent...
Page 16
SURFACE DE CUISSON AU GAZ Modèles CG365DW INSTRUCTIONS D’INSTALLATION 590686D 08.17...
FIXEZ AU COMPTOIR À L’AIDE DES SUPPORTS EN TENANT COMPTE DE L’ÉPAISSEUR DU COMPTOIR Placez la surface de cuisson dans la cavité et serrez-la à l’aide des pièces de fixation fournies. Celles-ci conviennent aux épaisseurs de comptoir de 3/4 po à 2 po RÉPÉTEZ SUR TOUS LES AUTRES CÔTÉS (19 mm à...
LISTE DE VÉRIFICATION FINALE À ÊTRE REMPLIE PAR L’INSTALLATEUR Avez-vous installé les supports de retenue? Avez-vous vérifié si le type de modèle (réglé en usine pour le gaz naturel (GN) ou le gaz de pétrole liquéfié (GPL)) correspond au type de gaz disponible sur le site d’installation? Avez-vous scellé...