Page 2
What if headset doesn't work after plugging the usb interface? PC setting problem: [ Control Panel ] [ Hardware and Sound ] [ Sound ] [ USB PnP Audio Device] [ Set as Default Device] [ Green Check Mark] [System [ Sound ] Preferences ] [Input ]...
Page 3
What can I do if there is no sound from headset, or if the sound is lost on one side? Pull out the 3.5mm interface and reinsert it. Wipe off the dirt and reinsert the 3.5mm interface; Connect the headset directly to the phone to test if it is good.
Page 4
PC settings problem: [Output ] [ Headset ] [ Play] [ Sound Option] [ High Defination Audio ] Please check if the headset is plugged into the computer jack correctly. The sound is emitted with 3 switches: Take Me To Your Heart...
Page 5
What if the microphone is silent? Please make sure microphone is not muted. Pull out the 3.5mm interface and reinsert it. Wipe off the dirt and reinsert the 3.5mm interface;...
Page 6
Connect the headset directly to the phone to test if it is good. PC setting problem: [Output ] [ Headset ] [ Play] [ Sound Option] [ High Defination Audio ]...
Page 7
What if the headset has current sounds or noise, echo? Connect one end of the copper wire to the screw on the back of current the computer and connect another end of the copper to ground. Keep the electric devices away from the headphones...
Page 8
Please plug headset stably into computer audio port. After plugging, it is better to fix the wire near the plug, Cancel the Microphone Boost [ Recording] [ Recording Devices] [ Properties] [ Microphone Boost ] [ Levels]...
Page 9
Support:All Windows System (SP/7/8/10) 1. Login to EKSA official website: www.eksa.shop 2. Click on "More" - "download" on the page 3. You will see "EKSA Surround 7.1" and click "Download" 4. After download, double-click the installation and you will see "EKSA Virtual 7.1 Setup"...
Need help?
Do you have a question about the Easy E900 and is the answer not in the manual?
Questions and answers