Cv Gate Settings; Controller - Arturia KEYSTEP PRO User Manual

9.6.5.7. Clock receive
Set whether the KSP will receive a clock signal from external MIDI devices.

9.6.6. CV Gate Settings

This is where you select the electrical behaviour for each sequencer.

9.6.7. Controller

These parameters enable you to set up the KeyStep Pro as a controller.
'Global MIDI channel' set the default MIDI channel on which the KeyStep Pro will transmit.
The Knob (encoder) settings define the functionality of the five encoders. Each Encoder can
have a different profile. Encoder 1 could transmit CC 9 on the second MIDI port on MIDI
channel 5. Encoder 2 could transmit CC 19 on the first MIDI port on MIDI channel 6 with the
range set to a minimum of 50 and a maximum value of 80.
Arturia - User Manual Keystep Pro - Keystep Pro Configuration 133