Troubleshooting - easyRESCUE PRO Series User Manual

Table of Contents

Advertisement

8

Troubleshooting

Problem
"TEST" LED is
blinking but
the "GPS" LED
has not started
blinking even
after 5 minutes.
The device
cannot be
turned on.
Cause
No GPS reception
Battery is too low
Page 41 of 52
Solution
The easyRESCUE needs a
GPS signal to perform the
test, which may be
difficult to receive in
some circumstances.
Therefore, it would be
best to perform the test
outdoors. If the same
error occurs again, please
return the device to your
distributor.
The
battery
designed
for
lifetime
with
function tests (up to 30
tests).
After this time the device
must be returned to the
distributor to have the
battery pack replaced.
Only the distributor is
entitled to do this!
pack
is
5
years'
several

Advertisement

Table of Contents
loading

Table of Contents