Led „Gps - easyRESCUE PRO Series User Manual

(Only applies to devices of the easyRESCUE-PRO/-PRO
In those devices with DSC function, the green DSC LED is
usually off during operation and only blinks when the Rescue
Transmitter receives a DSC confirmation.
This may be possible in 2 cases:
1) The Rescue Transmitter receives a DSC confirmation from a
ship or a coast control center during the DSC distress call
functionality. It continues to blink until the Rescue
Transmitter is switched off or if the battery is too low.
2) The Rescue Transmitters receives a DSC confirmation during
a function test.
4.2.4 LED „GPS"
LED "GPS"
receiving GPS signals and if a position
can be determined. If GPS reception is
not possible, the LED is stays off.
At the end of TEST mode, it indicates
– together with LED „TEST" – the Test
result.
Page 17 of 52
3
blinks green
series)
when