Programming Of The Mmsi For Dsc Alerts - easyRESCUE PRO Series User Manual

6

Programming of the MMSI for DSC Alerts

(Only applies to devices of the easyRESCUE-PRO/-PRO
Within the 5 years, as specified by SOLAS, until the next
replacement of batteries becomes necessary, a total of 30
minutes is scheduled for the programming. This does not
impair the operation of 96 hours (AIS operation) or 24 hours
(AIS & DSC operation) in the event of an activation.
In order for the easyRESCUE-PRO/-PRO
a "distress call" to your own boat it is necessary to program
the MMSI of the DSC radio device of the mother ship (for
"closed loop"). In this way, the Rescue Transmitter and the
DSC radio device on board of the mother ship are paired as a
2-way DSC communication unit according to GMDSS.
For users who are regularly on different ships, the MMSI
numbers of up to 8 different mother ships can the
programmed into the memory of the Rescue Transmitter.
They will be alerted in the "closed loop".
There are 3 different ways to program an MMSI:
1) via Bluetooth
smartphone
programming application "easyRESCUE-PRO"
(Only applies
easyRESCUE-PRO
®
connection to an iPhone
or tablet
to the easyRESCUE-PRO(BT
3
series)
Page 30 of 52
3
to being able to send
by using
3
series)
® ®
, iPad , Android
the Weatherdock
& BT-LV),
®