Programming Via Dsc „Individual Call - easyRESCUE PRO Series User Manual

6.2 Programming via DSC „Individual Call"
1) Go to the "Individual Call" settings of your VHF radio and
key in the Rescue Transmitter's Unit-ID (MMSI).
2) Press the "TEST" button of the
Rescue Transmitter for more than 3
seconds until a triple beep is heard.
Thereby all 4 LEDs light up.
3) The Rescue Transmitter is now in programming mode. All
the other LEDs, except for the yellow "TEST" LED, go off.
If there is no communication between the devices, the
Rescue Transmitter switches off after 3 minutes.
4) Perform an "Individual Call" to the Unit ID (MMSI) of the
Rescue Transmitter.
5) The Rescue Transmitter responds automatically and sends
a confirmation to the predetermined MMSI of the mother
ship. You will hear 5 beeps and the Rescue Transmitter
switches off automatically.
6) In most cases the confirmation of the Rescue Transmitter
also triggers an acoustic signal on the DSC radio device.
This way of MMSI programming can be performed up to 8
times in order to program up to 8 different MMSI (with 8
different radio devices) into the internal memory.
Page 36 of 52