Programming Via Programming Station - easyRESCUE PRO Series User Manual

The stored MMSI numbers cannot be changed or deleted
by means of the radio device.
When attempting to program a 9
Transmitter, there will be a warning with a quick successive
beep tone and the yellow "TEST" LED blinks quickly. For safety
reasons you must confirm this warning by pressing the "TEST"
button.
Change or deleting of MMSI numbers is only possible via App
or Programming station.
6.3

Programming via Programming Station

(Available as separate accessory)
The Programming Station accesses the electronics of the
Rescue Transmitter via the back panel contacts.
By means of the programming software installed on a PC, all
of the 8 possible MMSI numbers can be edited individually
(creating, editing, deleting).
th
number into the Rescue
Page 37 of 52