Table of Contents
Advertisement
Step 6: Mounting the coupling rod and hook
Attach the coupling bracket to the tongue using the 5/16" x 1" hexagonal bolt and 5/16" hexagonal lock
nut. Next, insert the coupling pin through the coupling
holder and secure the tongue with the R-pin. Tighten
the connections tightly.
1. Coupling rod
2. Hexagon head screw 5/16" x 1"
3. Locking nut 5/16"
4. Coupling hook
5. R-Hook
Step 7: Fastening the coupling rod to the support
Attach the coupling rod to the shelf with the large opening of the compartment slot facing forward.
Tighten the rod with the upper shaft holes on the right side of the slot (seen from the front). For the
right side spring connection holes (front view) use a 5/16" x 1-3/16" screw, two 1/4" spacers per screw,
and a 5/16" hex lock nut. For the left side of the
connection, use a 5/16" x 1" bolt and a 5/16" hex
lock nut, not spacers. For holes to the left of the
storage slot (front view), use the 5/16" x 1-3 / 16"
hex bolt, two 1/4" spacers per bolt, and the 5/16"
hex lock nut.
Tighten all connections.
1. Hexagon head screw 5/16x1-3/16"
2. Hexagon nut 5/16" x 1"
3. Locking nut 5/16"
4. 1/4" Spacer
© by WilTec Wildanger Technik GmbH
Seite 23
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
