Advertisement
Quick Links
Operation Manual
40" Lawn Aerator
51707
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 51707
Summary of Contents for WilTec 51707
- Page 1 Operation Manual 40” Lawn Aerator 51707 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Do not drive too close to a stream or ditch. 11. Do not tow this unit on a highway or other public road. 12. Follow the maintenance instructions as described in this manual. © by WilTec Wildanger Technik GmbH Item 51707 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 № Name № Name Plate Clutch Central Support Wheel (×2) Side Plate (×2) Wheel Holder (×3) Handle Double Coil (×2) Coupling Rod Single Coil (×2) Axis © by WilTec Wildanger Technik GmbH Item 51707 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 Spacer 0,79” long G R pin Locking Nut ¼” H Coupling pin Spacer 2,36” long Hexagon nut ½” Guide disk Locking nut ½” W Spacer 2,76” long © by WilTec Wildanger Technik GmbH Item 51707 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 Observe the direction of the insertion knives. 1. Start with a double coil (knife to the outside) 2. Single coil (knife to the outside) 3. 2.36” spacer (long) 4. Ø20 washer © by WilTec Wildanger Technik GmbH Item 51707 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 7 Repeat for the other side. 1. Side plate 2. Wheel holder 3. Screws ¼”×1– ” 4. Locking nut ¼” 5. Flat washer ” © by WilTec Wildanger Technik GmbH Item 51707 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 8 R pin. Tighten the connections tightly. 1. Coupling rod 2. Hexagon head screw ”×1” 3. Locking nut ” 4. Coupling hook 5. R pin © by WilTec Wildanger Technik GmbH Item 51707 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 9 ”×1” screws, Ø8 washer and ” hex lock nut. Do not tighten firmly. 1. Hexagon head screw ”×1” 2. Locking nut ” 3. Central support 4. Spacer Ø8 © by WilTec Wildanger Technik GmbH Item 51707 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 10 ”×1– ” hexagonal bolt, spacer and ” hexagonal lock nut. Tighten the connections firmly. 1. Hexagon head screw ”×1– ” 2. Locking nut ” 3. Spacer © by WilTec Wildanger Technik GmbH Item 51707 Page 10 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 11 But if you feel that this part does not fit cor- rectly, simply remove the pin. © by WilTec Wildanger Technik GmbH Item 51707 Page 11 http://www.WilTec.de http://www.aoyue.eu...
- Page 12 ATTENTION: TO AVOID INJURY, DISCONNECT THE AERATOR FROM THE TRACTOR WHEN LIFTING OR LOWERING THE FAN BLADES. © by WilTec Wildanger Technik GmbH Item 51707 Page 12 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 13 2. Before storage, clean the aerator and lightly oil exposed metal parts to prevent rusting. Lubrication 1. Oil the coil units and the shaft as required. 2. Oil the wheel as required. © by WilTec Wildanger Technik GmbH Item 51707 Page 13 http://www.WilTec.de http://www.aoyue.eu...
- Page 14 Spacers Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 51707 Page 14 http://www.WilTec.de...