Table of Contents
Advertisement
ATION
PREPARATION
1.
Turn on the machine by pushing the on/off switch.
Startup/Splash screen is displayed as the controller boots up.
NOTE: The current program number and the software revision of the
controller are displayed at startup. (The default settings are program
number P 11 for °F, P 12 for °C and software revision RV 1.0)
After booting up, the home screen is displayed showing the current heat
platen temperature and set cycle time. The heat indicating lamp is
represented by the snowflake in the upper left corner of the display. The heat
indicating lamp will display anytime the heating element is heating and will
cycle on and off after the set temperature is reached to maintain set
temperature.
HEAT INDICATING
TEMPERATURE
READOUT/SETTING
TEMPERATURE
MODE
TIME
READOUT/SETTING
Startup/Splash Screen
HOME MENU SCREEN
BUTTONS LAMP
TIME SCALE
MACHINE PRESET
ACCESS
SETTINGS MENU
Advertisement
Table of Contents
