Warning & Safety PLEASE READ AND FOLLOW INSTRUCTIONS BELOW TO PREVENT INJURY OR DAMAGE TO THE PRODUCT BakeMax® (a registered trademark of Titan Ventures International Inc or TVI) is not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment.
Product Installation & Set Up • After unpacking and cleaning your new countertop refrigerated showcase. Let it sit upright for at least 24 hours before plugging it in. Never tilt machine more than 45˚. If the unit is laid on its side to be moved, let the unit sit fully upright for 24 hours before plugging it back in.
Front Panel Operation 1. How to Set temperature Press “set” button, the set temperature is displayed. Press button to modify and store the displayed value. Press “set” button to exit the adjustment and display the cold-room temperature. 2. If no more button is pressed within 10 seconds, the cold-room temperature will be displayed.
Page 7
Position Description Position Description Position Description Left Shelf Power Cord Front Middle Pillar Bracket Condenser Fan Blade Evaporator Foam Base of Left Glass Motor Fan Evaporator Right Shelf Plastic Base for Left Panel Bracket Foam Digital Controller Pillar for Bracket Rear Bottom Pillar Compressor Left Seal...
Page 9
Position Description Position Description Position Description Water Tray Motor Fixer Rear Base Panel Cover for Air Curved Front Front Middle Pillar Outlet Glass Cover for Air Left Shelf Evaporator Suction Bracket Foam Base of Power Cord Fan Blade Evaporator Plastic Base for Condensator Motor Fan Pillar...
Need help?
Do you have a question about the BMREF Titan Series and is the answer not in the manual?
Questions and answers