Advertisement
Setting the Meter
The GlucoDr Plus Meter comes with the time, date, alarm(0), average day(7d) and unit of
measurement presents (mg/dL) preset. However, if you need to change the setting of
the meter, or if you replace the battery, you need to enter the SET MODE and reset them.
It is important to set the correct time and date. Having the correct time and date of each
blood glucose test result will help you and your healthcare professional to track changes
in your blood glucose level.
After replacing the battery, you should update the time and date setting.
Press and Hold the Power Button for 3 seconds
1
With the meter turned on, press and hold the power button until "SET"
appears on the meter. Release the power button to enter the SET MODE.
The Year flashes.
Set the Year
Press and release UP/DOWN button to adjust the year until the correct year
appears on the meter display. If you press and release the power button in
the SET MODE, the meter will advance to the Hour Setting.
To exit the SET MODE at any time, press and
hold the power button for 3 seconds. The
settings you have already made will be saved.
Advertisement
