SMART Embedded Computing MVME3100 Quick Start Manual page 2

7 Complete Installation
1. Verify that the board is installed and the power/peripheral
cables connected are appropriate for your system
configuration.
2. Replace the chassis or system cover, reconnect the system to
the AC or DC power source and apply power.
MVME3100 Single Board Computer Quick Start Guide
Technical Assistance
For technical assistance or to report product damage or shortages,
contact your local SMART Embedded Computing sales
representative or visit https://www.smartembedded.com/ec/support/
Get More Information
For more information on this product, see the
Single Board Computer Installation and Use
and other related technical documentation, which can be
found by using the Documentation Search at
https://www.smartembedded.com/ec/support/
SMART Embedded Computing, 2900 S. Diablo Way, Suite 190, Tempe, Arizona 85282
MVME3100
manual
.
© 2019 SMART Embedded Computing™, Inc. All rights reserved. The stylized "S" and
"SMART" is a registered trademark of SMART Modular Technologies, Inc. and "SMART
Embedded Computing" and the SMART Embedded Computing logo are trademarks of
SMART Modular Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. These materials are
provided by SMART Embedded Computing as a service to its customers and may be used
for informational purposes only. For full legal terms and conditions, visit
www.smartembedded.com/ec/legal.