Table of Contents
Advertisement
HUAWEI TP3206&TP3218&TP3218S Telepresence
Installation Guide
When fixing the tabletop displays, wear safety glasses to prevent dust from entering your
eyes.
1.
Insert four M6 x 25 countersunk screws into the screw holes in the tabletop displays
through the securing tabs, and partially tighten the screws.
2.
Adjust the height of the tabletop displays until they are flush with the tabletop.
a.
b.
3.
Adjust the gaps between the edges of the tabletop displays and the tabletop to ensure that
the gaps around the edges, other than the leading edge of the table top display
mechanism, furthest to conference participants, are even and the gap around the leading
edge is larger than the other gaps.
a.
b.
4.
Fully tighten the screws, as shown in
Issue 05 (2014-08-01)
Arrange one person to monitor the height of the tabletop displays.
Arrange another person under the conference table to adjust the four screws circled
in red in
Figure
8-22. Turn the screws anticlockwise to lower the tabletop display
and clockwise to raise the tabletop display.
Figure 8-22 Adjusting the tabletop display height 3.
Arrange one person to hold the tabletop display under the conference table and
adjust its position.
Arrange another person to watch the gaps between the edges of the tabletop displays
and the tabletop.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the First Row of the Multi-Functional
Figure
8-6.
Conference Table
78
Advertisement
Table of Contents
