Table of Contents
Advertisement
HUAWEI TP3206&TP3218&TP3218S Telepresence
Installation Guide
Figure 9-25 DIP switch
Step 2 To prevent the power fuse from being burnt out, set the DIP switch based on the standard
voltage of the device delivery region.
Step 3 Remove the transparent sticker from the power port, as shown in
delivered region-specific power cable to the power port.
Figure 9-26 Power port
Issue 05 (2014-08-01)
If the standard voltage is 220 V, retain the default settings (230 V).
If the standard voltage is 110 V, turn the DIP switch to -100-120V.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Devices
Figure
9-26. Connect the
117
Advertisement
Table of Contents
