Table of Contents
Advertisement
HUAWEI TP3206&TP3218&TP3218S Telepresence
Installation Guide
Figure 8-21 Mounting front panels and securing tabs
1.
2.
If the mounting holes in the tabletop segment cannot be aligned with those in a steel plate,
drill self-tapping screw holes in the tabletop segment and fasten self-tapping screws to secure
the steel plate to the tabletop segment.
Step 14 Fasten all screws to secure the tabletop segments in place.
The three tabletop segments must be level. If they are not level, gently hammer them using a rubber
mallet.
Step 15 When fixing the tabletop displays:
Issue 05 (2014-08-01)
Insert the front panel into the slot, and tighten the nuts using an open-end wrench with a
caliber of 8 mm to 10 mm.
Fasten the M6 x 16 countersunk screws provided with the securing tabs to secure the
securing tab to the tabletop segment.
Fix the center tabletop display first, then the left and right tabletop displays.
Do not exert excessive torque to the screws when using a rechargeable battery-powered
electric screwdriver to fasten them.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing the First Row of the Multi-Functional
Conference Table
77
Advertisement
Table of Contents
